WTT Wireless Telecom

Willtek Communications, a unit of Wireless Telecom Group, Inc., announced its TD-SCDMA call mode capability on its flagship 4400 Mobile Phone Tester Series, in support of China๏ฟฝs planned 3G deployment. The inclusion of this capability makes the Willtek 4400 the industry๏ฟฝs first mobile phone tester that integrates all of the standard 3G technologies, including UMTS/WCDMA, CDMA2000/1xEVDO, and TD-SCDMA. The product also supports the standard 2G technologies of both GSM/GPRS/EDGE and cdmaOne. Being displayed this week at the ITU Telecom World 2006 exhibition in Hong Kong, the Willtek 4400 allows mobile handset designers and manufacturers to efficiently test mobile phones of various standards in the same test environment. This is especially important in a dynamic market like China where each of the previously mentioned 2G and 3G technologies is expected to be offered by Service Providers, and mobile phones for each of the technologies will be manufactured. It is even more important at the beginning of a market introduction cycle, such as in the case of the China 3G roll-out, where the handset volumes in the new technologies will not always demand dedicated testing capabilities. With the Willtek 4400, a manufacturer can utilize the test capabilities for their high-volume GSM or CDMA lines, while then sharing capacity as required for WCDMA, CDMA2000, and TD-SCDMA, all through software. Monty Johnson, CEO of Wireless Telecom Group, Inc., stated, ๏ฟฝThe Chinese market is a strategic focus for the Wireless Telecom Group as a whole due to the tremendous wireless growth expected in the region. We are now proud to be supporting the Chinese wireless 3G initiative with the introduction of their China-developed TD-SCDMA standard into our industry-leading mobile phone tester. With significant 3G expansion expected within China in 2007, partly in preparation for the 2008 Olympic Games, we are positioned well to participate in the continued evolution of this market.๏ฟฝ ๏ฟฝAdditionally, we recently introduced a testing product through our Noise Com business unit for emerging High Definition Radio products. With the majority of these products being manufactured and tested in China, we are strategically positioned to play a strong role in this developing market and anticipate the continued opportunity to support the manufacture of such advanced electronic devices in China.๏ฟฝ Eckehard Mielke, Managing Director of Willtek Communications, added, ๏ฟฝWe have recently received orders for our 4400 tester to be used in the production of GSM mobile phones from two Chinese customers, one of which was a new customer. These orders are further evidence of China๏ฟฝs trust in Willtek๏ฟฝs ability to provide strategic turnkey solutions for wireless handset production. Remaining cognizant to the needs for both flexibility and low overall cost, we are pleased to introduce our TD-SCDMA test capability as an integrated option into our highly successful product.๏ฟฝ Willtek๏ฟฝs TD-SCDMA capability is planned for commercial availability within December. About Wireless Telecom Group Wireless Telecom Group, Inc designs and manufactures a variety of products serving the global wireless and telecommunications markets. Comprised of four business groups brought together through acquisitions, Noise Com, Boonton Electronics, Microlab/FXR, and Willtek Communications, the group provides a complementary suite of RF and Microwave-based products, with a major portion focused on advanced telecom testing. Their products include peak power meters, precision noise generators, mobile phone testing solutions, and passive component solutions for cellular/mobile, WiFi, satellite, and other advanced communications networks, all critical enablers to the rapid growth in world-wide communications and computing solutions. This technological synergy has enabled Wireless Telecom Group, Inc. to become a full service supplier of both the commercial and military telecommunications industries. About Willtek Willtek Communications provides test and measurement solutions to the wireless industry ๏ฟฝ including network operators, service providers, and manufacturers of mobile terminal equipment. The company delivers handheld spectrum analyzers and terminal test solutions across the world. Willtek takes a leading research and development role into innovative test solutions for 3G wireless devices. Willtek๏ฟฝs mobile test solutions are approved by nearly every leading mobile manufacturer. Handheld spectrum analyzers from Willtek are used in antenna and satellite maintenance, radiation measurements, general repair and military applications. Willtek became a wholly owned subsidiary of Wireless Telecom Group, Inc. in July 2005, and is headquartered in Ismaning near Munich (Germany) with additional presences in Parsippany, NJ (USA), Manchester (U.K.), Paris (France), Shanghai (P.R. China) and Singapore. Wireless Telecom Group๏ฟฝs website address is http://www.wtt.bz. Except for historical information, the matters discussed in this news release may be considered "forward-looking" statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Such statements include declarations regarding the intent, belief or current expectations of the Company and its management. Prospective investors are cautioned that any such forward-looking statements are not guarantees of future performance and involve a number of risks and uncertainties that could materially affect actual results. Such risks and uncertainties are identified in the Company's reports and registration statements filed with the Securities and Exchange Commission, including its Annual Report on Form 10-K for the year ended December 31, 2005. Willtek Communications, a unit of Wireless Telecom Group, Inc., announced its TD-SCDMA call mode capability on its flagship 4400 Mobile Phone Tester Series, in support of China's planned 3G deployment. The inclusion of this capability makes the Willtek 4400 the industry's first mobile phone tester that integrates all of the standard 3G technologies, including UMTS/WCDMA, CDMA2000/1xEVDO, and TD-SCDMA. The product also supports the standard 2G technologies of both GSM/GPRS/EDGE and cdmaOne. Being displayed this week at the ITU Telecom World 2006 exhibition in Hong Kong, the Willtek 4400 allows mobile handset designers and manufacturers to efficiently test mobile phones of various standards in the same test environment. This is especially important in a dynamic market like China where each of the previously mentioned 2G and 3G technologies is expected to be offered by Service Providers, and mobile phones for each of the technologies will be manufactured. It is even more important at the beginning of a market introduction cycle, such as in the case of the China 3G roll-out, where the handset volumes in the new technologies will not always demand dedicated testing capabilities. With the Willtek 4400, a manufacturer can utilize the test capabilities for their high-volume GSM or CDMA lines, while then sharing capacity as required for WCDMA, CDMA2000, and TD-SCDMA, all through software. Monty Johnson, CEO of Wireless Telecom Group, Inc., stated, "The Chinese market is a strategic focus for the Wireless Telecom Group as a whole due to the tremendous wireless growth expected in the region. We are now proud to be supporting the Chinese wireless 3G initiative with the introduction of their China-developed TD-SCDMA standard into our industry-leading mobile phone tester. With significant 3G expansion expected within China in 2007, partly in preparation for the 2008 Olympic Games, we are positioned well to participate in the continued evolution of this market." "Additionally, we recently introduced a testing product through our Noise Com business unit for emerging High Definition Radio products. With the majority of these products being manufactured and tested in China, we are strategically positioned to play a strong role in this developing market and anticipate the continued opportunity to support the manufacture of such advanced electronic devices in China." Eckehard Mielke, Managing Director of Willtek Communications, added, "We have recently received orders for our 4400 tester to be used in the production of GSM mobile phones from two Chinese customers, one of which was a new customer. These orders are further evidence of China's trust in Willtek's ability to provide strategic turnkey solutions for wireless handset production. Remaining cognizant to the needs for both flexibility and low overall cost, we are pleased to introduce our TD-SCDMA test capability as an integrated option into our highly successful product." Willtek's TD-SCDMA capability is planned for commercial availability within December. About Wireless Telecom Group Wireless Telecom Group, Inc designs and manufactures a variety of products serving the global wireless and telecommunications markets. Comprised of four business groups brought together through acquisitions, Noise Com, Boonton Electronics, Microlab/FXR, and Willtek Communications, the group provides a complementary suite of RF and Microwave-based products, with a major portion focused on advanced telecom testing. Their products include peak power meters, precision noise generators, mobile phone testing solutions, and passive component solutions for cellular/mobile, WiFi, satellite, and other advanced communications networks, all critical enablers to the rapid growth in world-wide communications and computing solutions. This technological synergy has enabled Wireless Telecom Group, Inc. to become a full service supplier of both the commercial and military telecommunications industries. About Willtek Willtek Communications provides test and measurement solutions to the wireless industry - including network operators, service providers, and manufacturers of mobile terminal equipment. The company delivers handheld spectrum analyzers and terminal test solutions across the world. Willtek takes a leading research and development role into innovative test solutions for 3G wireless devices. Willtek's mobile test solutions are approved by nearly every leading mobile manufacturer. Handheld spectrum analyzers from Willtek are used in antenna and satellite maintenance, radiation measurements, general repair and military applications. Willtek became a wholly owned subsidiary of Wireless Telecom Group, Inc. in July 2005, and is headquartered in Ismaning near Munich (Germany) with additional presences in Parsippany, NJ (USA), Manchester (U.K.), Paris (France), Shanghai (P.R. China) and Singapore. Wireless Telecom Group's website address is http://www.wtt.bz. Except for historical information, the matters discussed in this news release may be considered "forward-looking" statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Such statements include declarations regarding the intent, belief or current expectations of the Company and its management. Prospective investors are cautioned that any such forward-looking statements are not guarantees of future performance and involve a number of risks and uncertainties that could materially affect actual results. Such risks and uncertainties are identified in the Company's reports and registration statements filed with the Securities and Exchange Commission, including its Annual Report on Form 10-K for the year ended December 31, 2005.