Rapier Gold Inc. (TSX VENTURE:RPR) (the "Company") is pleased to announce
results from the remaining four diamond drill holes of its thirteen hole program
on the Pen Gold Project, approx. 75 km southwest of Timmins, Ontario (Appendix
1). Results on the first nine holes (PG13-101 through PG13-109) were released on
June 24, 2013 and are available on the Company's website.


Summary of the recent drilling:

PG13-110 (318 m)

This drill hole, in the Talc Mine Area, targeted a carb rock unit intersected in
a nearby historical drill hole. In addition to typical rock types, a previously
unknown sequence of pyrrhotite-rich felsic pyroclastic or debris flow units
along with a massive sulphide layer were encountered from 133 to 143 m downhole.
The lithologies observed are consistent with a VMS system. The Company will
retain a geochemical consultant to evaluate the VMS potential and guide future
exploration. If geochemical analysis indicates a favourable environment, this
VMS target will be explored by follow-up drilling. 


Timmins hosts the Kidd Creek mine, one of the largest VMS deposits in the world.

PG13-111 (201 m)

This hole, in the Talc Mine Area, targeted a sulphide-rich carb rock zone near
the sediment contact intersected in drill hole PG13-105, which was previously
released. The contact zone intersected in this drill hole was rich in sulphides
and tourmaline but with no significant veining. 


PG13-112 (309 m) and PG13-113 (411 m)

Drill holes PG13-112 and PG13-113 were drilled in the Westgate Area at an
azimuth of 180 degrees and 120 degrees respectively. The holes intersected
felsic tuffs and mafic volcanics, with sections of quartz carbonate veining,
localized sulphides and black tourmaline. The Westgate Area and targets
identified further to the west will be mapped and prospected this summer before
further drilling commences in the fall.


A map of the location of each drill hole is attached as Appendix 2 and details
of each hole are listed in Appendix 3.


Current summer work program:



1.  LIDAR ("Light Detection and Ranging" remote sensing method) surveying on
    the Pen Gold South area was completed in June and the data set was
    received July 17. This data set is being used as a mapping and
    prospecting tool, as well as for locating large geological
    structures/features. The Pen Gold Project, and much of the Timmins camp,
    typically contains 10 - 15% rock outcrop exposure. LIDAR is extremely
    time and cost effective in locating these outcrops. 
    
2.  Compilation of historical work in the area is continuing. The historical
    data have indicated several areas of interest for follow-up during our
    summer work program. One of these areas is the "Nib-Yellowknife" showing
    located approximately 2 km southwest of the Talc Mine Area. Similar to
    the Talc Mine Area, this location is near the contact of the Reeves
    Ultramafic Complex. Historic grab samples of up to 0.33 oz/ton had been
    reported from this showing. 
    
3.  Mapping and prospecting commenced on July 15 and four prospecting teams
    are in the field. This work, to locate key structures and alteration
    patterns, will continue until the end of October and will assist in
    planning drill programs for the fall and winter. 
    
4.  Interpretation of the drill results and correlation with known surface
    geology has begun. The results of this work together with mapping and
    prospecting results will guide the fall and winter drill programs. 



Summary highlights from the 13 hole drill program: 



--  Multiple contact zones between volcanic, intrusive and sedimentary units
    
--  Distinct gold-bearing quartz veins which can be traced over distances of
   greater than 100 meters 
    
--  Broad, intense carbonate alteration with an abundance of quartz veining 
    
--  Large, extensive structural elements and associated fluid systems 
    
--  Initial indications of VMS style mineralization



All of these elements occur on the Pen Gold Project, indicating ample
opportunity to host a sizeable gold deposit. The 13 holes completed, along with
historical holes drilled by Rio Tinto, are beginning to form the basis of a more
comprehensive understanding of the geology, which will identify fall and winter
drill targets. Based on the positive results in hole PG13-108, 13.02 g/t gold
over 4.3 m at 204 m depth, we are currently mapping in the Talc Mine Area.
Favourable areas may be rapidly stripped of overburden to enable more efficient
access and exploration of these zones and their surface expressions. Hole
PG13-110 has demonstrated the potential for VMS mineralization on the extensive
land position, presenting a new exploration target in the same vicinity of hole
PG13-108.


Under the terms of the transaction with Rio Tinto, Rapier acquired all the gold
rights on the Pen Gold Project and the talc mining operations on the same
property are owned by the French multinational Imerys S.A. 


About Rapier Gold Inc.



--  Rapier listed on the TSX.V on March 8, 2013 and currently has 23,817,838
    shares issued. 
    
--  Rapier's activities are solely focused on exploring the Pen Gold Project
    which comprises 16,448 hectares (approx. 160 sq km), 75 km southwest of
    Timmins, Ontario, in close proximity to the western extension of the
    Porcupine-Destor Deformation (Fault) Zone, one of the most productive
    gold structures in the world. 
    
--  AuRico Gold owns 19.9% of Rapier Gold. 



Quality Assurance - Quality Control ("QA/QC")

Industry best practices are followed on the project including the routine
insertion of duplicate, blank and standard samples in all drill holes. The core
samples are submitted directly to Actlabs in Timmins for preparation and
analysis. Gold analyses are conducted on 1 assay-ton aliquots, using fire assay
methods with an atomic absorption finish up to 5 g/t Au and with a gravimetric
finish above. Metallic sieve assays are requested for samples when visible gold
is observed. Gravimetric finish or metallic sieve results are used whenever
available, in the reporting of results.


Gary Wong, P.Eng., Vice-President Exploration of the Company, a Qualified Person
under the definition in National Instrument 43-101, has reviewed and approved
the technical content of this release.


ON BEHALF OF THE BOARD OF DIRECTORS

Roger Walsh, President & CEO

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that
term is defined in the policies of the TSX Venture Exchange) accepts
responsibility for the adequacy or accuracy of this news release.


Cautionary Note Regarding Forward-Looking Statements: Certain disclosure in this
release constitutes forward-looking statements. In making the forward-looking
statements in this release, the Company has applied certain factors and
assumptions that are based on the Company's current beliefs as well as
assumptions made by and information currently available to the Company,
including that the Company is able to obtain any government or other regulatory
approvals required to complete the Company's planned exploration activities,
that the Company is able to procure personnel, equipment and supplies required
for its exploration activities in sufficient quantities and on a timely basis
and that actual results of exploration activities are consistent with
management's expectations. Although the Company considers these assumptions to
be reasonable based on information currently available to it, they may prove to
be incorrect, and the forward-looking statements in this release are subject to
numerous risks, uncertainties and other factors that may cause future results to
differ materially from those expressed or implied in such forward-looking
statements. Such risk factors include, among others, that actual results of the
Company's exploration activities will be different than those expected by
management and that the Company will be unable to obtain or will experience
delays in obtaining any required government approvals or be unable to procure
required equipment and supplies in sufficient quantities and on a timely basis.
Readers are cautioned not to place undue reliance on forward-looking statements.
The Company does not intend, and expressly disclaims any intention or obligation
to, update or revise any forward-looking statements whether as a result of new
information, future events or otherwise, except as required by law.


To view Appendix 1, please visit the following link:
http://media3.marketwire.com/docs/rpr0726appendix1.pdf.


To view Appendix 2, please visit the following link:
http://media3.marketwire.com/docs/rpr0726appendix2.pdf.


To view Appendix 3, please visit the following link:
http://media3.marketwire.com/docs/rpr0726appendix3.pdf.


FOR FURTHER INFORMATION PLEASE CONTACT: 
Rapier Gold Inc.
Roger Walsh
(604) 617-1627
roger@rapiergold.com
www.rapiergold.com

Rapier Gold Inc. (TSXV:RPR)
과거 데이터 주식 차트
부터 5월(5) 2024 으로 6월(6) 2024 Rapier Gold Inc. 차트를 더 보려면 여기를 클릭.
Rapier Gold Inc. (TSXV:RPR)
과거 데이터 주식 차트
부터 6월(6) 2023 으로 6월(6) 2024 Rapier Gold Inc. 차트를 더 보려면 여기를 클릭.