Iberian Minerals Announces Positive Drill Results at Condestable's Vinchos Sur, Confirms Continuity of Raul Mine Mineralization
02 2월 2011 - 5:30AM
Marketwired Canada
Iberian Minerals Corp. (TSX VENTURE:IZN) today announces results from ongoing
exploration programs on targets surrounding the Company's Condestable Mine in
Peru. The Vinchos Sur, Condestable 10, Condestable Norte and San Marcos targets
were identified in previous exploration programs and were included in both the
2010 and 2011 budgets.
Daniel Vanin, President & CEO of Iberian said "The Company has a number of
targets at Condestable that are of interest to our team and we are pleased with
the initial results of our drill program.
We have identified a porphyry system at surface which could be of interest to
the company, and further test work will be undertaken to determine whether it
could support a small open pit operation.
The results of this initial drill campaign, and drill hole SDH-4680 in
particular, are confirmation of the economic continuity of Raul mine
mineralization down to the -530 level; which is 230m below the deepest level of
our current operations."
Vinchos Sur
The Vinchos Sur project, part of Condestable's 46,720 hectares of exploration
concessions, is located south of the Raul mine and was identified early on as a
priority target following the Raul mine purchase. Test work was undertaken in
order to identify mineralized targets surrounding the Raul mine to enable the
potential expansion of operations. Field work at Vinchos Sur began in May 2010.
As of August 2010, a total of 174 hectares had been mapped in the area. A total
of 270 chip samples were logged from vein and mantos outcrops, of which 162
samples were from mineralized structures and 108 from sample lines.
The sampling identified two north-east and north-west mineralized systems of
varying thickness from 0.30m-0.40m and mineralized mantos that appear to outcrop
in the north-east sector of the project (Chicharron unit roof) with 40-50
degrees SW dip exhibiting strong iron oxidation, which is often associated with
copper oxides.
Two mantos, 18 veins and 6 fault veins were identified on the surface with
grades averaging between 0.44% - 2.50% copper and two veins with maximum grades
of 8.08% and 5.66% copper respectively.
With mapping complete, the Company undertook a drilling program consisting of 6
drill holes totaling 1,800m in order to intercept the mineralized structures. A
stockwork zone in andesitic lava south-east of the project was discovered that
exhibited copper mineralization with values from 0.67% to 1.28% copper in chip
samples.
The drill campaign commenced in November 2010 with three drill holes totaling
1,304m. Highlights from these holes are:
SDH-4596: 466.20 m (Average dip: 42 degrees)
----------------------------------------------------------------
Length of Average Number of
From(m) To (m) Intercept (m) % copper samples
----------------------------------------------------------------
102.50 106.70 4.20 3.34 5
----------------------------------------------------------------
Hole SDH-4596 intercepted a fault vein with chalcopyrite mineralization at
approximately 73 meters above sea level. While the high grade of the mineralized
structure is important, zoning indicates that veins are also usually mantos
feeders, giving this fault vein important value as replacement mineralization in
mantos deeper in the deposit.
SDH-4662: 237.60 m (45 degrees dip)
No positive results.
SDH-4680: 600.25 m (Average dip: 68 degrees)
To view an image of SDH-4680: 600.25 m (Average dip: 68 degrees) please visit
the following link: http://media3.marketwire.com/docs/feb%20i%20image%201.pdf
------------------------------------------------------------
Length of Average Number of
From(m) To (m) Intercept (m) % copper samples
------------------------------------------------------------
50.25 51.05 0.80 1.18 1
------------------------------------------------------------
60.60 61.00 0.40 1.17 1
------------------------------------------------------------
62.75 64.00 1.25 1.40 1
------------------------------------------------------------
69.10 69.80 0.70 0.99 1
------------------------------------------------------------
512.10 512.80 0.70 1.57 1
------------------------------------------------------------
519.40 521.80 2.40 3.24 4
------------------------------------------------------------
526.50 528.20 1.70 2.09 3
------------------------------------------------------------
555.20 555.80 0.60 1.00 1
------------------------------------------------------------
563.20 564.90 1.70 0.76 3
------------------------------------------------------------
594.00 596.90 2.90 3.70 4
------------------------------------------------------------
603.40 605.00 1.60 0.76 3
------------------------------------------------------------
611.20 613.60 2.40 2.45 4
------------------------------------------------------------
614.10 619.90 5.80 1.13 10
------------------------------------------------------------
621.30 623.00 1.70 1.02 3
------------------------------------------------------------
623.30 623.90 0.60 1.09 1
------------------------------------------------------------
641.25 641.70 0.45 1.14 1
------------------------------------------------------------
642.90 645.90 3.00 1.21 5
------------------------------------------------------------
649.00 650.80 1.80 1.05 3
------------------------------------------------------------
651.40 653.60 2.20 2.39 4
------------------------------------------------------------
655.00 665.60 10.60 1.26 18
------------------------------------------------------------
667.40 694.20 26.80 1.73 46
------------------------------------------------------------
Hole SDH-4680 intercepted mineralized mantos at different depths as shown in the
table above. Mantos within the Polvorin Intermedio lithological units with
disseminated pyrite, chalcopryte and bornite were identified from 360 to 528
meters below sea level. These results demonstrate the continuity of
mineralization some 350 meters deeper than the current mantos stope operations.
Note: All intervals are core lenghts, true widths have not yet been calculated.
At the bottom of the same drill hole two mineralized sequences measuring 10.60m
and 26.80m (down hole lengths) were intercepted with 1.26% and 1.73% Cu average
grades respectively.
To view an image of "Overview of the Condestable and Raul Mines showing the
location of drill hole SDH 4680" please visit the following link:
http://media3.marketwire.com/docs/feb1%20image2.pdf
Condestable 10
The Company will start drilling at Condestable 10 at the end of March this year.
Initially part of the 2010 program, drilling at Condestable 10 was deferred in
order to concentrate on the Vinchos Sur target. Results will be expected in due
course.
Condestable Norte
The Condestable Norte target will follow up on potential extensions to the
Condestable Mine. A fault cuts off mineralization to the north of the Mine, and
exploration is planned to investigate possible mineralization on the far side of
the fault.
San Marcos
The Company previously identified the San Marcos target four kilometers north of
the Condestable Mine for inclusion in the 2010 drill program. Four holes were
drilled in a geophysical anomaly that intercepted mantos with minor
mineralization. San Marcos has been designated a lower priority target.
All technical information in this press release has been reviewed and approved
by Mike Newbury, P.Eng. who is a Qualified Person ("QP") under National
Instrument 43-101.
About Iberian Minerals Corp.
Iberian Minerals Corp. is a Canadian listed global base metals company with
interests in Spain and Peru. The Condestable Mine, located in Peru approximately
90 km south of Lima operates at 2.2 million tonnes per year producing copper,
and associated silver and gold in a concentrate. The Aguas Tenidas Mine is in
the Andalucia region of Spain approximately 110 km north-west of Seville and
operates a 2.2 million tonnes per year underground mine and concentrator that
produces copper, zinc and lead concentrates that also contain gold and silver.
FORWARD LOOKING STATEMENTS:
This news release contains certain "forward-looking statements" and
"forward-looking information" under applicable securities laws. Except for
statements of historical fact, certain information contained herein constitutes
forward- looking statements. Forward-looking statements are frequently
characterized by words such as "plan", "expect", "project", "intend", "believe",
"anticipate", "estimate", and other similar words, or statements that certain
events or conditions "may" or "will" occur. Forward looking information may
include, but is not limited to, statements with respect to the future financial
or operating performances of the Corporation, its subsidiaries and their
respective projects, the timing and amount of estimated future production,
estimated costs of future production, capital, operating and exploration
expenditures, the future price of copper, gold and zinc, the estimation of
mineral reserves and resources, the realization of mineral reserve estimates,
the costs and timing of future exploration, requirements for additional capital,
government regulation of exploration, development and mining operations,
environmental risks, reclamation and rehabilitation expenses, title disputes or
claims, and limitations of insurance coverage. Forward-looking statements are
based on the opinions and estimates of management at the date the statements are
made, and are based on a number of assumptions and subject to a variety of risks
and uncertainties and other factors that could cause actual events or results to
differ materially from those projected in the forward-looking statements. Many
of these assumptions are based on factors and events that are not within the
control of the Corporation and there is no assurance they will prove to be
correct. Factors that could cause actual results to vary materially from results
anticipated by such forward-looking statements include changes in market
conditions and other risk factors discussed or referred to in the section
entitled "Risk Factors" in the Corporation's annual information form dated March
29, 2010. Although the Corporation has attempted to identify important factors
that could cause actual actions, events or results to differ materially from
those described in forward-looking statements, there may be other factors that
cause actions, events or results not to be anticipated, estimated or intended.
There can be no assurance that forward-looking statements will prove to be
accurate, as actual results and future events could differ materially from those
anticipated in such statements. The Corporation undertakes no obligation to
update forward-looking statements if circumstances or management's estimates or
opinions should change except as required by applicable securities laws. The
reader is cautioned not to place undue reliance on forward-looking statements.
InZinc Mining (TSXV:IZN)
과거 데이터 주식 차트
부터 6월(6) 2024 으로 7월(7) 2024
InZinc Mining (TSXV:IZN)
과거 데이터 주식 차트
부터 7월(7) 2023 으로 7월(7) 2024
