Orca Gold Targets Maiden Resource at Galat Sufar South
12 9월 2013 - 9:00PM
Marketwired Canada
Orca Gold Inc. (TSX VENTURE:ORG) ("Orca" or the "Company") is pleased to report
the successful completion of the second drilling campaign of an initial
exploration program at the Galat Sufar South ("GSS") prospect on its Block 14
mineral license in Sudan.
Based on the results of a comprehensive analysis of the initial exploration
programs at GSS the Board of Directors has approved:
-- an exploration budget aimed at delineating an NI 43-101 compliant
initial resource at GSS by the end of the first quarter of 2014; and
-- the second required option payment to increase Orca's interest in the
Block 14 license to 52.5%.
On September 9, 2013, Orca made a second option payment of US$3 million to its
joint venture partner. This payment increases Orca's interest in the joint
venture company, Meyas Sand Minerals Co. Ltd ("MSMCL") from 35.0% to 52.5%. Orca
must make a final option payment of US$3 million by September 20, 2014 to retain
and increase its interest in MSMCL to 70%.
Results from the second drilling campaign at GSS continue to exhibit wide
intercepts and excellent grades (eg: holes GSDD004: 59m @ 2.43 g/t, GSRC161: 26m
@ 3.78 g/t, GSDD008: 48m @ 2.26 g/t, GSRC174: 32m @ 6.63 g/t). The entire
results are set out in Schedule A to this release and in full represent 5,897
metres of drilling completed since the last exploration update (News Release:
May 16, 2013). A total of 15,940 metres of drilling (13,790m of RC and 2,150m
diamond) has been completed to date at GSS. For ease of reference, the results
reported previously are attached as Schedule B. The Orca exploration team is
extremely encouraged by the consistent widths of high grade material being
intersected.
Mineralization at GSS is hosted in and is typical of structurally controlled,
mesothermal, shear zone hosted gold systems. The geology is dominated by
calc-alkaline volcaniclastics which are in places interbedded with marls and
dolomites and intruded by small, syenite and granite stocks. The dominant
alteration associated with gold mineralisation is sericite + silica +/-
carbonate. Pyrite is the main sulphide present.
Mineralisation is divided into two domains. The Main Zone is a N-S and NW
trending series of mineralized bodies associated with intense shearing and
quartz sericite alteration. The East Zone is 500m east of Main Zone where broad
zones of ENE trending mineralisation have been intersected in an area of similar
alteration with small, brecciated granitic stocks. The gap area between the Main
and East Zones remains substantially untested. This gap, like much of the area
around GSS is under sand cover. To date exploration at GSS has focused on
outcroppings and extensions thereof. There remains a wider area of alteration
(as mapped by geophysics) and prospective geology around GSS, much of it under
sand cover that is highly prospective and still to be explored. Part of the next
seven month work program will be aimed at testing the gap and other covered
areas.
The excellent results of the just completed exploration program, including an
assessment of the future potential of GSS, was the basis for a positive
recommendation by Orca's management to its Board to carry out a second,
aggressive, exploration program. This $7 million program will include:
-- approx. 18,000 metres of infill drilling aimed at delineating an NI 43-
101 compliant initial resource at GSS by the end of Q1 2014
-- An additional 10,000 metres of drilling targeted at areas outside the
contemplated initial resource area
-- Metallurgical testwork on composite samples from GSS
-- Baseline environmental work
-- Initial hydrological studies
-- Scoping level engineering for indicative operating and capital costs
Simon Jackson, President & CEO, said, "We are very excited by the discovery of
GSS and its potential. Exploration to date indicates solid widths to the
mineralization accompanied by significant grade. Our internal review of results
from our first program provides a compelling basis for increasing our interest
in Block 14 and advancing our pace of exploration. Our initial entry into Block
14 was always with the objective of finding a deposit that is capable of
becoming a commercial mining operation, and we believe that GSS is showing early
signs that it has real potential to fulfill that objective."
About Orca
Orca Gold Inc. is a Canadian resource company focussed on exploration
opportunities in Africa. The Company has an experienced board of directors and
management team and a strong balance sheet that includes over $50 million in
cash.
The technical contents of this release have been approved by Stuart Mills, BSc.,
MSc, a Qualified Person pursuant to NI-43101. Mr. Mills is the Sudan Manager of
the Company and a Member of the Institute of Materials, Mining and Metallurgy.
Samples used for the results described herein are prepared and analyzed by fire
assay using a 50 gram charge at the ALS Chemex facility at Rosia Montana in
Romania in compliance with industry standards. Field duplicate samples are taken
and blanks and standards are added to every batch submitted.
On behalf of the Board of Directors:
Simon Jackson, President, CEO and Director
Cautionary Statement Regarding Forward-Looking Information
This press release contains "forward-looking information" within the meaning of
applicable Canadian securities legislation. Generally, forward-looking
information can be identified by the use of forward-looking terminology such as
"anticipate", "believe", "plan", "expect", "intend", "estimate", "forecast",
"project", "budget", "schedule", "may", "will", "could", "might", "should" or
variations of such words or similar words or expressions or statements that
certain events "may" or "will" occur. Forward-looking statements in this press
release include, but are not limited to, statements relating to the plans of the
Company to delineate an NI 43-101 compliant resource and increase its ownership
in Block 14 and the future potential of GSS to become a commercial mining
operation, including exploration activities. Forward-looking information is
based on reasonable assumptions that have been made by the Company as at the
date of such information and is subject to known and unknown risks,
uncertainties and other factors that may cause the actual results, level of
activity, performance or achievements of the Company to be materially different
from those expressed or implied by such forward-looking information, including
but not limited to: risks associated with mineral exploration and development;
metal and mineral prices; availability of capital; accuracy of the Company's
projections and estimates; interest and exchange rates; competition; stock price
fluctuations; availability of drilling equipment and access; actual results of
current exploration activities; government regulation; political or economic
developments; environmental risks; insurance risks; capital expenditures;
operating or technical difficulties in connection with development activities;
personnel relations; the speculative nature of strategic metal exploration and
development including the risks of diminishing quantities of grades of reserves;
contests over title to properties; and changes in project parameters as plans
continue to be refined. Forward-looking statements are based on assumptions
management believes to be reasonable, including but not limited to the price of
gold; the demand for gold; the ability to carry on exploration and development
activities; the timely receipt of any required approvals; the ability to obtain
qualified personnel, equipment and services in a timely and cost-efficient
manner;
the ability to operate in a safe, efficient and effective manner; the expected
timing, costs, and results of a PEA; the expected burn rate; the regulatory
framework regarding environmental matters, and such other assumptions and
factors as set out herein. Although the Company has attempted to identify
important factors that could cause actual results to differ materially from
those contained in forward-looking information, there may be other factors that
cause results not to be as anticipated, estimated or intended. There can be no
assurance that such information will prove to be accurate, as actual results and
future events could differ materially from those anticipated in such
information. The Company does not undertake any obligation to update
forward-looking information if circumstances or management's estimates,
assumptions or opinions should change, except as required by applicable law.
Accordingly, readers should not place undue reliance on forward-looking
information contained herein, except in accordance with applicable securities
laws.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that
term is defined in the policies of the TSX Venture Exchange) accepts
responsibility for the adequacy or accuracy of this release.
Appendices
1. Map showing the interpreted zones
To view accompanying map, visit the following link:
http://file.marketwire.com/release/orca0912.jpg
Schedule A - results from second drilling campaign
New Main Zone Drill Intercepts
----------------------------------------------------------------------------
Au g/t Cut
Hole Type From To Metres Au g/t Uncut to 10g/t
----------------------------------------------------------------------------
GSDD004 DD 111 118 7 1.06
---------------------------------------------------------
128 187 59 2.43 1.99
---------------------------------------------------------
194 226 32 1.53
---------------------------------------------------------
235 241 6 1.84
---------------------------------------------------------
267 273 6 1.44
----------------------------------------------------------------------------
GSDD005 DD 144 167 23 2.44
---------------------------------------------------------
173 196 23 4.60 4.55
---------------------------------------------------------
202 209 7 4.60 4.54
---------------------------------------------------------
271 277 6 2.58
---------------------------------------------------------
280 290 10 1.52
----------------------------------------------------------------------------
GSDD006 DD 22 26 4 0.6
---------------------------------------------------------
36 54 18 1.29
---------------------------------------------------------
57 62 5 1.22
---------------------------------------------------------
73 78 5 0.65
---------------------------------------------------------
119 125 6 2.52
---------------------------------------------------------
154 158 4 1.03
----------------------------------------------------------------------------
GSRC099 RC NSI
----------------------------------------------------------------------------
GSRC100 RC 24 27 3 1.25
---------------------------------------------------------
29 32 3 1.03
----------------------------------------------------------------------------
GSRC101 RC 98 115 17 3.18
----------------------------------------------------------------------------
GSRC102 RC 1 8 7 1.42
---------------------------------------------------------
14 22 8 1.28
---------------------------------------------------------
197 201 4 3.91
---------------------------------------------------------
212 218 6 2.60
----------------------------------------------------------------------------
GSRC103 RC 9 25 16 8.47 5.57
----------------------------------------------------------------------------
GSRC104 RC 11 26 15 2.14
----------------------------------------------------------------------------
GSRC105 RC 120 125 5 1.88
----------------------------------------------------------------------------
GSRC106 RC 12 38 26 2.81
---------------------------------------------------------
74 83 9 1.72
----------------------------------------------------------------------------
GSRC107 RC 88 91 3 0.79
---------------------------------------------------------
93 100 7 1.01
---------------------------------------------------------
113 116 3 1.16
---------------------------------------------------------
127 130 3 0.70
---------------------------------------------------------
139 149 10 1.11
---------------------------------------------------------
160 164 4 0.66
---------------------------------------------------------
277 294 17 3.11
----------------------------------------------------------------------------
GSRC138 RC 19 31 12 1.65
---------------------------------------------------------
35 49 14 11.20 8.32
---------------------------------------------------------
64 70 6 1.93
----------------------------------------------------------------------------
GSRC139 RC 53 56 3 4.13
---------------------------------------------------------
61 64 3 2.84
---------------------------------------------------------
69 72 3 12.57 7.59
---------------------------------------------------------
116 120 4 2.29
----------------------------------------------------------------------------
GSRC140 RC NSI
----------------------------------------------------------------------------
GSRC141 RC NSI
----------------------------------------------------------------------------
GSRC142 RC NSI
----------------------------------------------------------------------------
GSRC143 RC 107 114 7 1.01
----------------------------------------------------------------------------
GSRC144 RC 1 4 3 1.90
----------------------------------------------------------------------------
GSRC145 RC NSI
----------------------------------------------------------------------------
GSRC146 RC NSI
----------------------------------------------------------------------------
GSRC161 RC 40 48 8 0.58
---------------------------------------------------------
78 104 26 3.78 3.19
---------------------------------------------------------
106 115 9 2.66
----------------------------------------------------------------------------
GSRC183 RC 33 36 3 1.51
---------------------------------------------------------
51 54 3 2.31
---------------------------------------------------------
63 70 7 9.67 7.65
---------------------------------------------------------
120 128 8 1.39
----------------------------------------------------------------------------
GSRC184 RC 60 88 28 2.44 2.26
----------------------------------------------------------------------------
GSRC185 RC NSI
----------------------------------------------------------------------------
GSRC186 RC 4 18 14 1.10
----------------------------------------------------------------------------
GSRC187 RC 44 48 4 1.25
----------------------------------------------------------------------------
GSRC188 RC 55 58 3 0.76
----------------------------------------------------------------------------
Note: True widths are in general 50-70% of intercept width. The reported
intercepts were determined using a cut-off grade of 0.50g/t with a maximum
of 3m internal dilution being incorporated into the intercept where
appropriate.
New East Zone Drill Intercepts
----------------------------------------------------------------------------
Au g/t Cut
Hole Type From To Metres Au g/t Uncut to 10g/t
----------------------------------------------------------------------------
GSDD007A DD 39 44 5 0.91
---------------------------------------------------------
62 84 22 1.77
---------------------------------------------------------
124 135 11 0.85
---------------------------------------------------------
138 143 5 0.78
---------------------------------------------------------
149 164 15 0.73
---------------------------------------------------------
198 210 12 0.85
---------------------------------------------------------
324 327 3 1.13
---------------------------------------------------------
349 353 4 1.14
---------------------------------------------------------
365 369 4 4.55 4.28
----------------------------------------------------------------------------
GSDD008 DD 0 10 10 1.70
---------------------------------------------------------
16 27 11 1.61
---------------------------------------------------------
29 33 4 0.91
---------------------------------------------------------
36 48 12 1.24
---------------------------------------------------------
60 65 5 1.67
---------------------------------------------------------
69 117 48 2.26
---------------------------------------------------------
125 131 6 1.18
---------------------------------------------------------
179 183 4 0.56
---------------------------------------------------------
188 192 4 1.20
---------------------------------------------------------
203 210 7 1.53
---------------------------------------------------------
216 232 16 1.50
---------------------------------------------------------
242 256 14 1.20
---------------------------------------------------------
259 278 19 2.83
---------------------------------------------------------
286 293 7 1.87
---------------------------------------------------------
296 329 33 0.57
---------------------------------------------------------
331 351 20 1.57
----------------------------------------------------------------------------
GSRC085 RC 39 44 5 1.28
---------------------------------------------------------
49 53 4 1.63
----------------------------------------------------------------------------
GSRC086 RC 85 94 9 1.46
----------------------------------------------------------------------------
GSRC087 RC 102 105 3 1.07
----------------------------------------------------------------------------
GSRC088 RC 0 35 35 1.78
---------------------------------------------------------
38 44 6 1.05
---------------------------------------------------------
47 92 45 1.01
---------------------------------------------------------
95 120 25 2.14
----------------------------------------------------------------------------
GSRC089 RC NSI
----------------------------------------------------------------------------
GSRC090 RC NSI
----------------------------------------------------------------------------
GSRC091 RC 66 69 3 1.29
----------------------------------------------------------------------------
GSRC092 RC NSI
----------------------------------------------------------------------------
GSRC093 RC NSI
----------------------------------------------------------------------------
GSRC094 RC 101 106 5 1.47
----------------------------------------------------------------------------
GSRC095 RC 94 97 3 3.07
---------------------------------------------------------
117 120 3 1.67
----------------------------------------------------------------------------
GSRC096 RC 76 92 16 1.02
----------------------------------------------------------------------------
GSRC097 RC 35 40 5 0.75
----------------------------------------------------------------------------
GSRC098 RC 0 4 4 0.84
---------------------------------------------------------
42 60 18 1.66
---------------------------------------------------------
70 77 7 1.20
---------------------------------------------------------
81 85 4 1.74
---------------------------------------------------------
123 132 9 1.00
----------------------------------------------------------------------------
GSRC108 RC 3 15 12 1.14
---------------------------------------------------------
33 39 6 2.18
---------------------------------------------------------
46 63 17 7.44 5.12
---------------------------------------------------------
83 112 29 4.03 3.98
----------------------------------------------------------------------------
GSRC109 RC 113 119 6 10.52 4.46
---------------------------------------------------------
122 156 34 2.75 2.62
----------------------------------------------------------------------------
GSRC110 RC NSI
----------------------------------------------------------------------------
GSRC111 RC 7 10 3 2.20
---------------------------------------------------------
88 93 5 2.78
---------------------------------------------------------
105 108 3 1.08
---------------------------------------------------------
110 113 3 1.25
----------------------------------------------------------------------------
GSRC112 RC 1 11 10 1.07
---------------------------------------------------------
48 52 4 0.71
---------------------------------------------------------
58 62 4 1.14
---------------------------------------------------------
110 115 5 0.52
----------------------------------------------------------------------------
GSRC113 RC 75 79 4 1.11
---------------------------------------------------------
94 108 14 0.84
----------------------------------------------------------------------------
GSRC114 RC 118 124 6 0.78
----------------------------------------------------------------------------
GSRC115 RC 51 61 10 0.74
---------------------------------------------------------
82 86 4 0.73
----------------------------------------------------------------------------
GSRC116 RC 0 3 3 1.57
---------------------------------------------------------
30 33 3 0.58
---------------------------------------------------------
35 43 8 1.90
---------------------------------------------------------
64 72 8 0.66
----------------------------------------------------------------------------
GSRC117 RC 1 26 25 1.56
---------------------------------------------------------
38 45 7 1.18
---------------------------------------------------------
54 58 4 0.97
---------------------------------------------------------
60 65 5 2.06
----------------------------------------------------------------------------
GSRC118 RC 115 125 10 0.97
----------------------------------------------------------------------------
GSRC119 RC 8 84 76 1.02
---------------------------------------------------------
89 108 19 1.14
---------------------------------------------------------
111 118 7 4.51 4.11
---------------------------------------------------------
120 128 8 2.87
---------------------------------------------------------
130 135 5 1.00
----------------------------------------------------------------------------
GSRC147 RC NSI
----------------------------------------------------------------------------
GSRC148 RC NSI
----------------------------------------------------------------------------
GSRC149 RC NSI
----------------------------------------------------------------------------
GSRC150 RC 15 19 4 2.17
----------------------------------------------------------------------------
GSRC151 RC 49 52 3 0.95
---------------------------------------------------------
78 92 14 1.55
----------------------------------------------------------------------------
GSRC152 RC 2 8 6 1.30
---------------------------------------------------------
54 60 6 0.88
---------------------------------------------------------
73 77 4 1.63
---------------------------------------------------------
118 121 3 1.30
---------------------------------------------------------
145 149 4 0.74
----------------------------------------------------------------------------
GSRC153 RC NSI
----------------------------------------------------------------------------
GSRC154 RC 89 93 4 4.93
---------------------------------------------------------
116 120 4 1.79
----------------------------------------------------------------------------
GSRC155 RC 1 8 7 2.03
----------------------------------------------------------------------------
GSRC156 RC NSI
----------------------------------------------------------------------------
GSRC157 RC NSI
----------------------------------------------------------------------------
GSRC158 RC NSI
----------------------------------------------------------------------------
GSRC159 RC 10 15 5 3.12
----------------------------------------------------------------------------
GSRC160 RC 13 23 10 1.89
---------------------------------------------------------
28 31 3 1.03
---------------------------------------------------------
32 35 3 1.69
---------------------------------------------------------
108 111 3 0.90
----------------------------------------------------------------------------
GSRC171 RC 46 51 5 0.98
---------------------------------------------------------
72 79 7 0.76
----------------------------------------------------------------------------
GSRC172 RC 3 6 3 2.66
---------------------------------------------------------
37 60 23 1.50
---------------------------------------------------------
64 67 3 1.00
---------------------------------------------------------
70 74 4 0.66
---------------------------------------------------------
77 83 6 1.70
---------------------------------------------------------
86 90 4 0.53
---------------------------------------------------------
93 104 11 0.72
----------------------------------------------------------------------------
GSRC173 RC 9 46 37 2.42
----------------------------------------------------------------------------
GSRC174 RC 1 4 3 1.47
---------------------------------------------------------
14 17 3 2.54
---------------------------------------------------------
26 37 11 2.06
---------------------------------------------------------
108 140 32 6.63 3.07
----------------------------------------------------------------------------
GSRC175 RC 52 57 5 0.93
---------------------------------------------------------
61 73 12 2.83
---------------------------------------------------------
114 137 23 3.80 2.95
----------------------------------------------------------------------------
GSRC176 RC 1 8 7 0.60
---------------------------------------------------------
35 58 23 1.46
---------------------------------------------------------
62 66 4 1.18
---------------------------------------------------------
74 77 3 1.03
---------------------------------------------------------
80 92 12 0.89
---------------------------------------------------------
95 109 14 1.05
----------------------------------------------------------------------------
GSRC177 RC 0 13 13 1.59
---------------------------------------------------------
17 47 30 2.16
---------------------------------------------------------
49 122 73 1.59
----------------------------------------------------------------------------
GSRC178 RC 18 42 24 0.88
---------------------------------------------------------
45 54 9 0.76
----------------------------------------------------------------------------
GSRC179 RC 60 63 3 2.41
---------------------------------------------------------
110 114 4 0.68
---------------------------------------------------------
126 131 5 0.91
---------------------------------------------------------
134 137 3 2.16
---------------------------------------------------------
152 155 3 5.47
----------------------------------------------------------------------------
GSRC180 RC 71 81 10 1.45
---------------------------------------------------------
88 99 11 1.11
----------------------------------------------------------------------------
GSRC181 RC NSI
----------------------------------------------------------------------------
GSRC182 RC 76 94 18 1.32
---------------------------------------------------------
100 103 3 1.34
---------------------------------------------------------
133 137 4 1.35
----------------------------------------------------------------------------
Note: True widths are in general 50-70% of intercept width. The reported
intercepts were determined using a cut-off grade of 0.50g/t with a maximum
of 3m internal dilution being incorporated into the intercept where
appropriate.
Schedule B - results from previous drilling campaigns
MAIN ZONE
----------------------------------------------------------------------------
Au g/t Cut
Hole Type From To Metres Au g/t Uncut to 10g/t
----------------------------------------------------------------------------
GSDD001 DD 80 161 81 1.22 1.22
----------------------------------------------------------------------------
GSDD002 DD 11 31 20 1.88 1.88
---------------------------------------------------------
35 74 39 3.19 2.74
---------------------------------------------------------
77 98 21 1.36
---------------------------------------------------------
136 148 12 0.80
---------------------------------------------------------
161 174 13 1.74
---------------------------------------------------------
210 222 12 1.64
----------------------------------------------------------------------------
GSDD003A DD 241 251 10 1.97
---------------------------------------------------------
298 311 13 2.07
---------------------------------------------------------
322 352 30 1.38
----------------------------------------------------------------------------
GSRC001 RC 26 85 59 2.67
---------------------------------------------------------
94 120 26 2.48
----------------------------------------------------------------------------
GSRC002 RC 5 21 16 5.02 3.59
---------------------------------------------------------
42 49 7 1.17
---------------------------------------------------------
54 95 41 2.30
----------------------------------------------------------------------------
GSRC003 RC 0 10 10 4.61 4.24
---------------------------------------------------------
27 36 9 5.42 4.13
---------------------------------------------------------
101 120 19 13.60 6.39
----------------------------------------------------------------------------
GSRC004 RC 68 77 9 1.21
---------------------------------------------------------
86 121 35 1.42
----------------------------------------------------------------------------
GSRC005 RC 21 25 4 1.02
---------------------------------------------------------
29 38 9 0.68
----------------------------------------------------------------------------
GSRC006 RC 18 25 7 13.18 6.99
---------------------------------------------------------
110 120 10 2.77 2.61
----------------------------------------------------------------------------
GSRC007 RC 8 15 7 2.64
---------------------------------------------------------
68 78 10 1.13
----------------------------------------------------------------------------
GSRC008 RC 12 18 6 1.92
---------------------------------------------------------
81 99 18 0.86
----------------------------------------------------------------------------
GSRC009 RC 4 8 4 0.49
---------------------------------------------------------
11 16 5 2.01
---------------------------------------------------------
19 24 5 6.63
---------------------------------------------------------
77 84 7 1.92
----------------------------------------------------------------------------
GSRC010 RC 23 34 11 0.65
----------------------------------------------------------------------------
GSRC032 RC 3 12 9 2.79
----------------------------------------------------------------------------
GSRC033 RC 6 11 5 1.36
------------------------------------------
132 138 6 1.66
----------------------------------------------------------------------------
GSRC034 RC 33 38 5 0.98
----------------------------------------------------------------------------
GSRC035 RC NSI
----------------------------------------------------------------------------
GSRC081 RC 32 35 3 1.41
---------------------------------------------------------
52 71 19 15.29 6.24
---------------------------------------------------------
77 80 3 3.62
---------------------------------------------------------
98 101 3 12.36 7.70
---------------------------------------------------------
136 144 8 6.12 5.35
---------------------------------------------------------
149 159 10 1.79
---------------------------------------------------------
162 187 25 7.60 6.30
----------------------------------------------------------------------------
GSRC082 RC 1 5 4 3.47
---------------------------------------------------------
9 57 48 1.79
---------------------------------------------------------
62 68 6 0.94
---------------------------------------------------------
71 85 14 15.78 6.01
---------------------------------------------------------
87 95 8 1.10
---------------------------------------------------------
97 101 4 2.26
---------------------------------------------------------
109 116 7 1.33
---------------------------------------------------------
152 165 13 1.76
----------------------------------------------------------------------------
GSRC083 RC 69 81 12 1.97
---------------------------------------------------------
157 168 11 1.31
----------------------------------------------------------------------------
Note: True widths are in general 50-70% of intercept width. The reported
intercepts were determined using a cut-off grade of 0.50g/t with a maximum
of 3m internal dilution being incorporated into the intercept where
appropriate.
East Zone
----------------------------------------------------------------------------
Au g/t Cut
Hole Type From To Metres Au g/t Uncut to 10g/t
----------------------------------------------------------------------------
GSRC011 RC 0 35 35 3.65 3.6
---------------------------------------------------------
47 51 4 0.56
---------------------------------------------------------
57 72 15 3.27 3.03
---------------------------------------------------------
76 79 3 1.4
----------------------------------------------------------------------------
GSRC012 RC 0 63 63 2.39 2.03
---------------------------------------------------------
66 84 18 0.76
---------------------------------------------------------
89 94 5 2.61
---------------------------------------------------------
99 106 7 0.84
----------------------------------------------------------------------------
GSRC013 RC 0 16 16 1.85
---------------------------------------------------------
97 101 4 0.93
----------------------------------------------------------------------------
GSRC014 RC 31 39 8 5.15 4.55
---------------------------------------------------------
45 56 11 1.57
---------------------------------------------------------
120 133 13 0.8
----------------------------------------------------------------------------
GSRC015 RC 11 15 4 1.09
---------------------------------------------------------
19 30 11 2.49 2.09
---------------------------------------------------------
35 47 12 1.23
---------------------------------------------------------
54 59 5 0.9
---------------------------------------------------------
99 107 8 0.75
----------------------------------------------------------------------------
GSRC016 RC 53 60 7 2.18
----------------------------------------------------------------------------
GSRC017 RC 36 47 11 0.92
---------------------------------------------------------
123 140 17 2.58
----------------------------------------------------------------------------
GSRC018 RC 23 27 4 1.07
---------------------------------------------------------
43 49 6 1.76
---------------------------------------------------------
51 57 6 1.06
---------------------------------------------------------
66 79 13 0.98
----------------------------------------------------------------------------
GSRC019 RC 7 11 4 3.02
---------------------------------------------------------
43 48 5 1.36
---------------------------------------------------------
55 59 4 0.69
---------------------------------------------------------
86 90 4 0.74
----------------------------------------------------------------------------
GSRC020 RC 5 9 4 0.8
---------------------------------------------------------
17 21 4 1.54
---------------------------------------------------------
26 39 13 1.46
---------------------------------------------------------
100 103 3 3
----------------------------------------------------------------------------
GSRC021 RC 1 4 3 0.96
---------------------------------------------------------
7 39 32 1.45
---------------------------------------------------------
44 48 4 1.57
---------------------------------------------------------
57 65 8 1.71
---------------------------------------------------------
80 87 7 2.33
---------------------------------------------------------
93 98 5 2.8
----------------------------------------------------------------------------
GSRC022 RC 1 15 14 2.15
----------------------------------------------------------------------------
GSRC023 RC 0 52 52 1.9
---------------------------------------------------------
62 67 5 0.97
---------------------------------------------------------
70 81 11 1.01
---------------------------------------------------------
83 109 26 1.07
---------------------------------------------------------
112 120 8 2.06
----------------------------------------------------------------------------
GSRC024 RC 13 16 3 0.97
---------------------------------------------------------
19 36 17 7.46 6.9
---------------------------------------------------------
40 58 18 1.33
----------------------------------------------------------------------------
GSRC025 RC NSI
----------------------------------------------------------------------------
GSRC026 RC NSI
----------------------------------------------------------------------------
GSRC027 RC 8 28 20 2.08
---------------------------------------------------------
45 56 11 2.02
---------------------------------------------------------
98 104 6 2.03
---------------------------------------------------------
127 134 7 0.71
----------------------------------------------------------------------------
GSRC028 RC 22 27 5 0.58
---------------------------------------------------------
45 48 3 0.64
---------------------------------------------------------
50 63 13 2.25 1.75
---------------------------------------------------------
70 75 5 0.83
----------------------------------------------------------------------------
GSRC029 RC NSI
----------------------------------------------------------------------------
GSRC030 RC 92 95 3 11.43 7.08
----------------------------------------------------------------------------
GSRC031 RC 8 15 7 0.72
----------------------------------------------------------------------------
GSRC084 RC 16 28 12 0.68
---------------------------------------------------------
108 111 3 1.08
---------------------------------------------------------
114 118 4 4.67
---------------------------------------------------------
121 126 5 2.82
---------------------------------------------------------
129 132 3 0.81
---------------------------------------------------------
137 140 3 1.45
---------------------------------------------------------
152 157 5 0.61
---------------------------------------------------------
169 187 18 3.36 3.15
---------------------------------------------------------
197 202 5 0.87
---------------------------------------------------------
219 224 5 0.76
---------------------------------------------------------
228 243 15 1.09
----------------------------------------------------------------------------
Note: True widths are in general 50-70% of intercept width. The reported
intercepts were determined using a cut-off grade of 0.50g/t with a maximum
of 3m internal dilution being incorporated into the intercept where
appropriate.
FOR FURTHER INFORMATION PLEASE CONTACT:
Orca Gold Inc.
Simon Jackson
604 689 7842
604 689 4250 (FAX)
Gossan Resources (TSXV:GSS)
과거 데이터 주식 차트
부터 11월(11) 2024 으로 12월(12) 2024
Gossan Resources (TSXV:GSS)
과거 데이터 주식 차트
부터 12월(12) 2023 으로 12월(12) 2024
